Biomass Boiler Air Preheater
Air preheater(APH)is the shell and tube type heat exchangers used
for preheating the air which is fed to the boiler or furnaces/
kilns for combustion of fuels. Air preheater’s primary objective is
to extract the waste heat from the flue gases leaving the boiler.
There are two types of air preheaters for use in steam generators
in thermal power stations: One is a tubular type built into the
boiler flue gas ducting, and the other is a regenerative air
preheater.These may be arranged so the gas flows horizontally or
vertically across the axis of rotation.
Advantage of air preheater
- Increases thermal efficiency of the system
- Payback period is very short and increase combustion rate
- Improve and strengthen the combustion
- Reduces the loss of furnace and the exhaust gas temperature,
improve the boiler thermal efficiency.
- Air preheater is suitable for all standard fuels
- They are easy for retrofit into existing systems
- These air preheaters are suitable for all waste heat boiler / flue
gas boiler / boiler types.
- They strengthen the heat transfer
|Material||Carbon steel or equivalent|
|Tubes||enameled seam or seamless tubes|
|Remarks||Customized order is also accepted.|
|Manufacturing process||Material→Ingot → Hot/Cold-Rolling→ Heat treatment(Normalizing+
tempering) → Inspection→Cutting→Pipe piercing→welding→Sealing
Boiler Air Preheater
1. Material of out shell: Galvanized-steel with painting, stainless
steel, PU soft coat, aluminum-alloy.
2. Material of inner tank: Duplex stainless steel 2304/2205,
SUS304, SUS316L are available.
3. Insulation: polyurethane resin foaming / PU soft coat.
4. Material of inner coils: Copper / stainless steel / wave
Suzhou ORL Power Engineering Co., Ltd.is located in Suzhou, Jiangsu
ORL Power is a leading company and exporter of industrial
boilers,power plant boilersand boiler parts (including steam drum,
membrane waterwall panel,header,economizer, evaporator,
superheater,H-fin economizer, spiral fin tube, air preheater, heat
pipe, flue etc.), seamless steel tubes/pipes and ERW steel
pipes.ORL provides our customer with full range of services
including boiler design, fabrication, installation and
commissioning, boiler maintenance, and supervision at site. Our
product and service include design and manufacture industrial
boilers, pressure vessels and tanks, and pressure parts for power
plant boilers (600MW, or 1000MW).
1. The solar collector absorbs solar energy and transit the heat to
the tank through heating-liquid.
2. When the temperature of collector and tank bottom temperature
difference reach to 8 degree, the circulating pump start running to
take the solar heat to tank.
3. The tank heat exchanger coil will transfer the heat with outside
cold water to reach customer's hot water using.
4. If there is no sunshine or not enough sunshine, it can start
E-heater, heat pump unit or other auxiliary heating sources ensure
enough hot water for users.
1. Why choose us?
We are boiler and boiler parts(boiler drum, boiler waterwall panel,
boiler economizer, boiler header, boiler cyclone separator, boiler
flue pipe, boiler air preheater, boiler pipe, boiler
tube)manufacture and we are one of the best suppliers in China.
We ensure the deliver time, high quality, and the best after-sale
service for you.
2. How to order?
Welcome come to our factory for inspecting and discussion the